Quick Details
Material Type:Film
Material:PET
Application:Pen Holder,Stationery
Type:Heat Transfer
Temperature:High
Place of Origin:Dongguan, China (Mainland)
Brand Name:YIXIN
MOQ:800 square meters
Thickness:0.02mm--0.025mm
Max colors:10 color
Max Printing width:60cm
Delivery Time: 10-15 days
Shipping:By express, by Sea, or by air
Payment condition:100% for plate-making charge,50% deposit of the production
Packing Detail:200metres/roll , Polybag+drying agent+carton
Procedure of Films Production |
1. Artwork | we will make an layout design for you ,according to your given draft design and product detail |
↓ |
2.Confirm the artwork | After you confirm the final design then we will start for the plate making |
↓ |
3.Plate making | It takes about 7~8 days |
↓ |
4.Film printing | Print in big rolls →drying → cut into small rolls →quality check It takes about 4-5 days |
↓ |
5.Packaging | Polybag+drying agent+carton |
↓ |
6. Delivery | By express, by Sea, or by air →It's up to you |
↓ |
7.Payment | 100% for plate-making charge,50% deposit for the films production |
Feature Of Heat Transfer Films
1.Eco-friendly & Non-toxic
2.Good performance of sticking
3.Strong covering power
4.Good Wear resistance and sunlight resistance
5.Pattern is vivid and realistic
6.Color is bright and sharp
7.Little color distortion
8.Good effect of color gradient
Hot Stamping Foil Printing For Pen Holder ,Printing Samples For Reference:
Heat Transfer Film:
One Part Of Our Sample Room:
How to Keep the Heat Transfer Films
It 's well-known that the film is very much important for the
heat transfer printing.It can be a big problem for the whole production if there is some storage problem of the films.So below are some tips for how to keep the heat transfer films in good condition:
1.The film rolls need to put vertically,cannot put horizontally in case the ink layer will come out because of the pressure
2.Note for the press and throw.As the ink layer on the films will be come off easily ,the films cannot be treated rudely.We have seen some production line worker sitting on one carton of films directly in our one client's factory.It's wrong to do like that because it will damage the films easily.
3.Keep the films away from heat,it's best to keep the films in 20-40℃.
4.The films should be kept dry.Once it becomes damp,it will create gas when heated to print the products,which will make the films have chemical action.Therefore,the films need to be kept in cool, well-ventilated and dry place to remain in the best condition.
