This film is non-toxic, eco-friendly, waterproof , nonslip ,easy to clean and install, Little color distortion, Color is bright and beautiful.
| Specifications |
| Item Name: | Hot stamping foil for toy component/ ABS component of lantern |
| Usage | for toy component/ ABS component of lantern |
| Material | ABS |
| Thickness | 0.02mm--0.025mm |
| Delivery Time | 10~15 days |
| Method | Heat transfer printing |
| Brand Name | YiXin |
| Material Type | Film |
| MOQ | 800 square meters |
| Maximum colors | 10 |
Procedure of Films production
1. Artwork we will make an layout design for you ,according to your given draft design and product detail
↓
2.Confirm the artwork After you confirm the final design then we will start for the plate making
↓
3.Plate making It takes about 7~8 days
↓
4.Film printing Print in big rolls →drying → cut into small rolls →quality check
It takes about 4-5 days
↓
5.Packaging Polybag+drying agent+carton
↓
6. Delivery By express, by Sea, or by air →It's up to you
The way to keep the film
It 's well-known that the film is very much important for the
heat transfer printing.It can be a big problem for the whole production if there is some storage problem of the films.So below are some tips for how to keep the heat transfer films in good condition:
1.The film rolls need to put vertically,cannot put horizontally in case the ink layer will come out because of the pressure
2.Note for the press and throw.As the ink layer on the films will be come off easily ,the films cannot be treated rudely.We have seen some production line worker sitting on one carton of films directly in our one client's factory.It's wrong to do like that because it will damage the films easily.
3.Keep the films away from heat,it's best to keep the films in 20-40℃.
4.The films should be kept dry.Once it becomes damp,it will create gas when heated to print the products,which will make the films have chemical action.Therefore,the films need to be kept in cool, well-ventilated and dry place to remain in the best condition.
Aeon Printing Materials Co.,LTD which was established in 1999,is the first modern high-tech enterprise with professional heat transfer printing and plate making in China.We import advanced printing plate making equipments from USA and Germany,and we use domestic high-end heat transfer equipments also.After recent 10 years development,our business already covered all parts in the world,which has big influence in same industry.
Heat transfer printing toy component
Hot stamping toy component
Heat transfer film for toy component
Hot stamping foil for toy component
About Aeon Printing Matrials Co.,Ltd
The main gate of Aeon Printing Materials Co.,Ltd
The show room of Aeon Printing Materials Co.,Ltd
